Universal Water Bottle Holder

NT$690

Color:






Quantity:


This Universal Water Bottle Holder makes it easy to access water bottles while walking. No need to take off your backpack anymore. It is compatible with all kinds of packs, not only HANCHOR backpacks and can be used as a pocket to hold all sorts of stuff.

• Adopt 100D Nylon PC Coating ripstop fabric (waterproofness 1500 mmH2O , Hydrolysis and Scrubbing resistant)
• Shipped with 2 pieces YKK MOLLE buckles
• Drawstring opening, easy to adjust and tighten the pocket (May also leverage the drawstring to fix your water bottle when moving fast)
• 
Drainage grommet at the bottom
 

Weight:
48g
Dimension:
Hold water bottles up to 9cm in diameter
Material:
100D Nylon PC Coating ripstop fabric (water proofness1500 mmH2O , Hydrolysis and Scrubbing resistant)

Universal Water Bottle Holder can be quickly attached onto any backpacks. It makes it easy and convenient to access water bottles while walking.

 

How to attach a water bottle holder onto your backpack?

Step 1: Release the molle buckle
Step 2: Clip through the webbing on your backpack's strap 
Step 3: Complete the set up and ready to go

* This MOLLE buckle fits webbing width no wider than 1.5 inches

 


Easily access water bottle with only one hand.  Able to change the connection spots with quick release molle buckles.

 

Adjust to higher spot

 

clipped on belt loops 
 

It is also possible to clip water bottle holder on Padded hipbelt- P1

 

Make Padded hipbelt-P1 go through the webbing on the back of the water bottle holder to make it more stable while moving.

 

Drawstring on the edge, easy to tighten the pocket. May also leverage the string to fasten the water bottle.


 

Drainage grommet at the bottom




Universal Water Bottle Holder in Use: 




 

222

Universal Water Bottle Holder

Average 5.0

Your Rate

Post a Comment

王政傑

2021/12/29

哪兒有門市可去選購?

Hanchor

2021/12/30

配合的經銷商店面資訊,可參考這邊: https://www.hanchor.com/faq?locale=zh

王政傑

2021/12/29

要買通用外掛式水壺袋, 如何快速購入? NT$690

Hanchor

2021/12/30

您好,此官網頁面下單即可幫您出貨唷,謝謝!

火腿大王

2021/11/08

可以放nalgene 1000ml水壺嗎

Hanchor

2021/11/09

您好,這邊提供您商品規格參考:水壺袋適用最大直徑9cm之水瓶。

yich

2021/08/05

這個能掛在clast側邊嗎? 看起來扣具是橫扣,只能扣在垂直的織帶?

Hanchor

2021/08/05

CLAST 包款的話適合的位置會是肩帶連接包體的位置,側邊織帶位置則不會這麼適合噢。

洪崇霖

2021/07/03

請問泡綿背板的長與寬是多少? 容納水壺的布料部分的長度是多少? 謝謝!

Hanchor

2021/07/06

泡綿的部分長寬約為26cm*11.5cm (布料約比泡綿短3cm),適用最大直徑9cm水瓶。

王衣婕

2021/05/14

我想要預訂一隻黑色的水壺袋

Hanchor

2021/05/14

目前尚有現貨,確認訂單即可為您處理出貨。

楊勝宇

2021/04/19

請問還有貨?

Hanchor

2021/04/20

目前正在製作中,完成後可以信件給您到貨通知噢。

2021/04/11

要怎麼設定貨到通知啊,想買黑色的

Hanchor

2021/04/12

這邊已經為您備註,製作完成後會寄信給您通知噢。

吳孟蓉

2021/03/26

請問還會進貨?

Hanchor

2021/03/29

目前剩下灰綠色的現貨,黑色的部分尚在安排製作中,這邊能夠完成後給您信件通知噢。

2021/01/14

請問未來是否會再出更輕量材質的水壺袋~ 期待能出類似Zpack的水壺袋款式 https://zpacks.com/products/water-bottle-sleeve

Hanchor

2021/01/14

目前待開發的品項有點多,不過未來有機會一定會再開發的XD

陳敏潔

2020/12/11

期待能購買

Hanchor

2020/12/11

目前尚有現貨,下單後即可為您處理出貨噢。

iris

2020/12/04

請問黑色還會再補貨嗎?謝謝您

Hanchor

2020/12/04

剛剛補上囉~

GOGOGO

2020/06/11

建議也可做成外觀網狀材質,然後可以直接套在肩袋上面(讓PUMICE也可以裝在肩膀)

Hanchor

2020/06/12

謝謝您的分享建議,會轉給設計師做參考。

王金枝

2020/05/26

貨到通知 謝謝

Hanchor

2020/05/26

已經更新庫存,線上即可下單囉。

徐鼎淵

2020/05/22

本身有使用貴公司的防水手機包, 對貴公司產品讚賞。 這個水壺袋設計不錯,可以用來擴充用, 想掛哪,就掛哪。

NEIL

2020/03/24

請問尚有庫存嗎? 想訂購了

Hanchor

2020/03/24

目前尚未製作完成,這邊屆時有庫存給您Email 通知噢。

小勳

2020/03/11

哪時可以買?

Hanchor

2020/03/11

目前待預購出貨完畢後官網即可直接下單噢,這邊屆時給您Email通知~

張金墉

2020/03/04

可以再開放一次訂購嗎?太晚看到email 了

Hanchor

2020/03/04

待早鳥活動出貨完畢後會正式上架,請再給我們一點時間準備~

Neil Pan

2020/02/22

請問灰綠有照片嗎?黑色目前完售會追加預購嗎?謝謝

Hanchor

2020/02/24

不好意思目前沒有灰綠色的水壺袋樣品,因此無法提供照片,不過該面料與 PUMICE 包款是相同的,可以參考看看 PUMICE 極輕量背包的頁面。黑色部分庫存數字已經更新,重新整理頁面就可以下單囉。

Eating

2020/02/20

想請問水壺袋的高度尺寸是?不確定自己的保溫瓶是否會太高

Hanchor

2020/02/20

水壺帶的背板高度大概是25cm噢。

鄭鐳

2020/02/17

價格應該要更優惠. 尤其對老客戶!

Hanchor

2020/02/17

謝謝您的建議,我們會盡量回饋給大家的。